What is the Cheb Rig?
The Cheb Rig or The Cheburashka Rig is something you may have heard of but aren’t really sure how it is different from other rigs that you’ve used in the past, for example, the Ned Rig or the Jika Rig. There are a number of reasons that you might want to consider using this rig, but before we get into why you might want to use it, let’s take a look at what it actually is.
Much like the Ned Rig, it is a great way to fish for perch – especially if you are not having much luck catching them. The reason for this is that the Cheb Rig is a brilliant technique for searching the water and can be fished quicker than the ned rig, therefore covering more water. It is also quite versatile due to being able to change the weight, hook size and pattern very quickly.
The key to success when fishing with the Cheb Rig, is having a range of Cheb weights. Whether you use an offset hook and fished weedless or a mounted straight hook, it’s the movement between the weight and the hook that make the lure look great in the water.
The Cheb Rig is a unique pin and weight system that is perfect for a very effective bottom jiggling technique. It was developed in Russia has become popular in the UK and Europe. If you are moving around whilst fishing and encounter lots of different fishing situations and swims, then the Cheb Rig is ideal. The quick-release and change system lets you fish at different depths, in different conditions, all with multiple weight jig heads in a short session.
The rig isn’t anything too complicated. In fact, it is a basic, trace body that terminates in a clip. Add to this the Cheb weights and a hook that is suitable for whatever bait you are using to fish. A Finesse Worm hook is commonly used with the Cheb Rig, though you are also fine using an EWG Offset style hook as well.
Depending on what you are trying to fish with the Cheb Rig will influence the kind of lure you are using. We have listed a few baits that we like to use at the bottom of the page. Whatever bait you choose to use, a float stop can be extremely useful to keep the bait in place.
When to use the Cheb Rig
The Cheb Rig can be used at any time of year and can be especially useful if you find that you are stuck in a rut with your fishing and want to try something different or you need to search the fish out.
Advantages of the Cheb Rig
The Cheb Rig is one that comes with many advantages:
- The weight is attached to the hook – unlike other rigs, namely the Texas Rig, the weight is actually attached to the hook. This means that you don’t get the same low pressure, running-away bites that you can get with a Texas Rig. Instead, you get a firm bite.
- It’s easy to change the hook
- It’s easy to change the weight
- It’s weedless
- You can change the weight, hook and bait to fish different species of fish as and when you need to.
- The weight sits on the bottom, and the hook can move freely to the bait. It allows action on the bait just sitting in the flow.
How Do I Fish With it?
Fishing with the Cheb Rig is can be done in a fast or slow way, similar to fishing with the Ned Rig. Though when fishing slower you will need to be a little more patient with the Cheb rig, especially when fishing using buoyant baits. Once the weight hits the bottom, you need to let it sit for a second so that the bait has a chance to bob back up. Then using small taps and bounces, no more than six inches of movement along the bottom at a time before you let it sit. Make sure that each time you let the bait sit a little longer than you would with a Ned Rig to let the bait float back up again.
If you are in doubt about how good the Cheb Rig looks in the water, watch it come back up to surface and glide it around a bit.
Setting up the Cheb Rig
Tie a figure-eight loop at the top of the mainline. It’s a small loop, but it is strong enough for fishing the Cheb Rig, but most importantly it is small enough that you can easily pass the Cheb weight over the top of it. This is the method we use to make the Cheb even easier to swap around. However many other anglers just tie an improved clinch knot directly to the Cheb clip without using a loop. It’s entirely up to you. See the videos below if you are unsure about either knot.
To put the weight on the line, choose whatever Cheb weight that you want to use, and then take the pin out of the centre of the weight. Thread the loop through the centre of the weight, the hook the loop through the pin. Don’t put it back in the weight just yet, it’s time for the hook first. Take the hook you are fishing and thread it onto the clip. Once the hook and line are both hooked in place on the pin, pull the weight back down the line and slip the pin back into the centre of the weight.
Not only is this set up really flexible, but it also saves on having to use an additional clip on this rig. It also makes it much easier to swap the hook and weight whenever you want to.
While we only ever link to tackle and lures that we have used and recommended, the links below are affiliate links. This means that if you click a link and buy the product we may receive a small commission from the retailer (at no extra cost to yourself). Should you choose to use an affiliate link please know that we are extremely grateful and any commission we do receive helps us to maintain the blog.
Here is the fun bit, the tackle.
Any light lure rod will do look for a casting range of 3-10g or 5-15g or similar.
A small spinning reel in the range of 1000 to 2500 is all you need to get started with the Cheb Rig.
Braid is always best for lure fishing as its lack of stretch allows you to feel the bite instantly. A lighter braid will be easier to cast but a stronger braid will help you if you are fishing snaggy locations. We tend to use a 10lb braid.
Cheb Rig Weights
Enjoyed our post on the Cheb Rig? Let us know in the comments below.
Any other suggestions? Leave a comment below or get in touch